Just wanted to share this!

Are you a Tim Holtz fan? We are!
capescrapper

Re: Just wanted to share this!

Post by capescrapper »

Thanks Julie! :happy94:

I can give you my dimensions if you need them!
User avatar
jfugina
Posts: 7480
Joined: Tue Nov 11, 2008 11:30 pm
Location: St. Louis

Re: Just wanted to share this!

Post by jfugina »

That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection! :D Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!
Julie Fugina
#26 in the order of the PAO
capescrapper

Re: Just wanted to share this!

Post by capescrapper »

jfugina wrote:That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection! :D Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!

No problem at all!

Back panel 10 x 7.5"
Middle divider 10 x 5"
Bottom front panel 10 x 3.75"
Bottom floor panel 10 x 2 5/8"
(2) Bottom side panels and (1) center divider 3 7/8 x 1 1/2"
(2) Middle side panels and (1) center divider 5 x 1"

I assembled the entire outer piece first and then added the divider pieces finding the midpoint and slid them down into place. After this was dry I added the bottom.
User avatar
nancine
Posts: 4885
Joined: Tue Nov 11, 2008 10:26 pm
Location: left coast
Contact:

Re: Just wanted to share this!

Post by nancine »

this is just super fantastic!
capescrapper

Re: Just wanted to share this!

Post by capescrapper »

Thanks Nancy! :happy94:
User avatar
jfugina
Posts: 7480
Joined: Tue Nov 11, 2008 11:30 pm
Location: St. Louis

Re: Just wanted to share this!

Post by jfugina »

capescrapper wrote:
jfugina wrote:That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection! :D Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!

No problem at all!

Back panel 10 x 7.5"
Middle divider 10 x 5"
Bottom front panel 10 x 3.75"
Bottom floor panel 10 x 2 5/8"
(2) Bottom side panels and (1) center divider 3 7/8 x 1 1/2"
(2) Middle side panels and (1) center divider 5 x 1"

I assembled the entire outer piece first and then added the divider pieces finding the midpoint and slid them down into place. After this was dry I added the bottom.
Excellent. Thank you! Bookmarking for future reference. :-)
Julie Fugina
#26 in the order of the PAO
Post Reply