Thanks Julie!
I can give you my dimensions if you need them!
Just wanted to share this!
Re: Just wanted to share this!
That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection! Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!
Julie Fugina
#26 in the order of the PAO
#26 in the order of the PAO
Re: Just wanted to share this!
jfugina wrote:That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection! Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!
No problem at all!
Back panel 10 x 7.5"
Middle divider 10 x 5"
Bottom front panel 10 x 3.75"
Bottom floor panel 10 x 2 5/8"
(2) Bottom side panels and (1) center divider 3 7/8 x 1 1/2"
(2) Middle side panels and (1) center divider 5 x 1"
I assembled the entire outer piece first and then added the divider pieces finding the midpoint and slid them down into place. After this was dry I added the bottom.
Re: Just wanted to share this!
this is just super fantastic!
Re: Just wanted to share this!
Excellent. Thank you! Bookmarking for future reference.capescrapper wrote:jfugina wrote:That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection! Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!
No problem at all!
Back panel 10 x 7.5"
Middle divider 10 x 5"
Bottom front panel 10 x 3.75"
Bottom floor panel 10 x 2 5/8"
(2) Bottom side panels and (1) center divider 3 7/8 x 1 1/2"
(2) Middle side panels and (1) center divider 5 x 1"
I assembled the entire outer piece first and then added the divider pieces finding the midpoint and slid them down into place. After this was dry I added the bottom.
Julie Fugina
#26 in the order of the PAO
#26 in the order of the PAO